It’s certainly been a busy week in the world of enterprise computing.
First, Cisco announced their Unified Computing System – blade servers to you and me. UCS integrates blade servers with management functionality and the Unified Fabric. What’s interesting is that Fibre Channel gets pushed out at this point [...]
Fibre Channel over Ethernet has been back on my radar recently, especially as it was touted again at Storage Networking World in Orlando last week. Unfortunately I wasn’t there and didn’t see for myself, although I was in Orlando the week before on vacation. I can imagine if I’d extended [...]
LeftHand, FalconStor, Arkeia and Datacore all now offer VMware appliance versions of their products. I’m in the process of downloading them now and I’m hoping to install over the next few days and do some testing. I’ve previously mentioned some VM NAS products which I’ve installed but [...]
I’m not quite sure what the right way is to respond to posts; If I comment after them, then there’s a chance that the responses might be missed. Anyway I will attempt to go back and check all those comments I’ve not responded to. First, here’s a response to Cedric’s question, on [...]
Robin harris discusses AoE from Coraid. I looked at this last year (reminder) as I saw it as a great way to get a FC/iSCSI solution at a low cost. However, before everyone rips out their FC SANs and runs to put an Ethernet solution in place, take one step [...]
I’ve done the last part of my iSCSI evaluation. Previously I looked at the protocol itself and the ways to secure data. Transmission needs to be secured by either IPsec for a shared network or a dedicated network infrastructure. The last part of the jigsaw I checked out was how to validate [...]
I’ve been doing more VMware work recently. The deployment I’m working on is using SAN presented disk. The storage started as 50GB LUNs, quickly grew to 100GB and now we’re deploying on 200GB LUNs, using VMFS and placing multiple VM guests on each meta volume.
Now, this presents a number of problems. Firstly, it was [...]
To tie down my iSCSI test environment I’ve implemented IPsec between client and server. This allows me to encrypt either the traffic or headers of my IP stream. I chose ESP (Encapsulating Security Payload) as this gives full confidentiality to my data, rather than Authentication Header (AH) which provides integrity as to [...]
..or do some people not like comments. Here’s another iSCSI post from Marc Farley at Equallogic. I think he’s saying iSCSI is good. I agree – good in the right circumstance.
Marc – either tell me how to or enable comments – please!!
_uacct = “UA-1104321-2″;
urchinTracker();
I’ve done some more work on iSCSI. That meant rebuilding one of my iSCSI client environments as I totalled it by trying to add another drive to the VM guest. Anyway, panic over. I’ve got the client working again and I’ve been running traces to see how easy it is to locate relevant data in [...]
Popular Posts
- Netapp: The Inflexibility of Flexvols (5,816)
- Back to Blogging (3,846)
- The technical solution is not always the best (3,371)
- Enterprise Computing: Why Thin Provisioning Is Not The Holy Grail for Utilisation (3,034)
- Data ONTAP 8.0 – Part III (2,994)
- Comparing iSCSI Targets – Microsoft, StarWind, iSCSI Cake and Kernsafe – Part I (2,532)
- Solid State Arrays: Pure Storage Inc (2,437)
- EMC Releases All Flash VNX (2,315)
- Review: Compellent Storage Center – Part II (2,213)
- Who Will Be The First Solid State Array Vendor To Be Acquired? (2,035)
